Attach the fin and stabilizer – E-flite S.E.5a Slow Flyer 250 ARF User Manual

Page 16

E-flite S.E.5a Slow Flyer ARF Assembly Manual



9. Position the outer strut between the top and bottom

wings as shown. Use foam-safe CA to glue the outer strut

to the top and bottom wings.



10. Repeat Steps 8 and 9 to install the remaining outer

strut between the top and bottom wings.

Attach the Fin and Stabilizer

Required Parts

• Rudder/Fin

• Elevator/Stabilizer

• Micro control horn (2)

• Micro control horn backplate (2)

Required Tools and Adhesives

• Square

• Foam-safe CA

• Sandpaper



1. Position the rudder/fin tab into the slot in the

stabilizer/elevator. The green side of the stabilizer/

elevator faces the rudder/fin. Use a square and foam-

safe CA to glue the two items together, making sure the

rudder/fin is square to the stabilizer/elevator.