E-flite Hawker Sea Fury 480 ARF - Manual (Page 16)

16 E-flite Hawker Sea Fury 480 ARF Assembly Manual
 8. Slide the tail gear wire through the tail gear
bushing as shown.
 9. Test fit the rudder to the fin. Once satisfied with
the fit, use thin CA on the hinges and tail gear wire
to secure the rudder to the fin. Make sure not to get
CA in the tail gear assembly.
 10. Slide the wheel spacer onto the tail gear wire.
 11. Slide the tail wheel onto the tail gear wire.
 12. Secure the wheel using the wheel axle cap and
medium CA. Use care not to get CA between the
tail gear wire and wheel, which will prevent the
wheel from rolling.