E-flite Hawker Sea Fury 480 ARF - Manual (Page 12)

12 E-flite Hawker Sea Fury 480 ARF Assembly Manual
 8. Connect the leads from the motor to the speed
control. Slide the motor mount onto the motor stick.
 9. Secure the motor mount using the 1.5mm x
10mm self-tapping screw and a #00 Phillips
screwdriver. Secure the wires inside the motor
compartment so they will not interfere with the
operation of the motor.
 10. Check the operation of the motor at this time.
It should rotate counterclockwise when viewed
from the front of the aircraft. If not, follow the
instructions provided with your speed control to
correct the situation.
 11. Remove the backing from the double-sided
tape on both sides of the fuselage.
 12. Slide the cowling onto the fuselage. Press the
cowling against the tape to secure it in position.
Always balance your propeller. An unbalanced
propeller can cause vibrations to be transmitted
into the airframe, which could damage the
airframe or other components as well as
produce unwanted flight characteristics.
If it is necessary to enlarge the hole in
the propeller or the spinner, make sure to
check the balance of each afterwards.
 13. Slide the propeller adapter into the propeller.