Banner Extension Modules - Manual (Page 8)

Extension Module –
Model EM-T-7A
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 888.373.6767 • http://www.baneng.com • Email: [email protected]
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period.
This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty
either expressed or implied.
Periodic Checkout
The checkout procedure described on page 7 should be performed according to the
intervals specified by the product documentation of the Primary Safety Device
controlling this Extension Module.
Repairs
Do not attempt any repairs to the EM-T-7A Extension Module. It contains no field-
replaceable components. Return the Extension Module to the factory for warranty
repair or replacement.
If it ever becomes necessary to return an Extension Module to the factory, please do
the following:
1) Contact the Banner Factory Application Engineering Group at the addresses or at
the numbers listed at the bottom of page 8. They will attempt to troubleshoot the
system from your description of the problem. If they conclude that a component is
defective, they will issue an RMA (Return Merchandise Authorization) number for
your paperwork, and give you the proper shipping address.
2) Pack the Extension Module carefully. Damage which occurs in return shipping is
not covered by warranty.