Dimensions, Certifications and standards, Ec declaration of conformity (doc) – Banner Universal Input Safety Modules User Manual
Page 14: Standards and regulations, U.s. application standards, International/european standards
Dimensions
Certifications and Standards
EC Declaration of Conformity (DOC)
Banner Engineering Corp. herewith declares that the UM-FA-9A and UM-FA-11A Universal Safety Modules for industrial control are
in conformity with the provisions of the Machinery Directive (98/37/EEC) and all essential health and safety requirements have been met.
For more information, visit
Standards and Regulations
The list of standards below is included as a convenience for users of this Banner device. Inclusion of the standards below does not imply
that the device complies specifically with any standard, other than those specified in the Specifications section of this manual.
U.S. Application Standards
ANSI B11.0 Safety of Machinery, General Requirements, and Risk Assessment
ANSI B11.19 Performance Criteria for Safeguarding
ANSI NFPA 79 Electrical Standard for Industrial Machinery
International/European Standards
ISO 12100 Safety of Machinery – General Principles for Design — Risk Assessment and Risk Reduction
IEC 60204-1 Electrical Equipment of Machines Part 1: General Requirements
ISO 14119 (EN 1088) Interlocking Devices Associated with Guards – Principles for Design and Selection
ISO 14120 Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards
ISO 13857 Safety Distances . . . Upper and Lower Limbs
ISO 13850 (EN 418) Emergency Stop Devices, Functional Aspects – Principles for Design
ISO 13855 (EN 999) The Positioning of Protective Equipment in Respect to Approach Speeds of Parts of the Human Body
IEC 61508 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems
IEC 62061 Functional Safety of Safety-Related Electrical, Electronic and Programmable Control Systems
ISO 13849-1 (EN 954-1) Safety-Related Parts of Control Systems
IEC 60947-1 Low Voltage Switchgear – General Rules
IEC 60947-5-1 Low Voltage Switchgear – Electromechanical Control Circuit Devices
IEC 60947-5-5 Low Voltage Switchgear – Electrical Emergency Stop Device with Mechanical Latching Function
IEC 60529 Degrees of Protection Provided by Enclosures
UM-FA-xA Universal Input Safety Modules
14
www.bannerengineering.com - tel: 763-544-3164
P/N 141249_web
Rev. E