Banner MSA Series Protective Mounting Stands - Manual (Page 2)

MSA Series Protective Mounting Bracket
2
P/N 64715 rev. A
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
MSA Series Protective Mounting Bracket
P/N 64715 rev. A
3
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Figure 1. MSA Series Protective Bracket dimensions
104.6 mm
(4.12")
66.5 mm
(2.62")
87.4 mm
(3.44") 2x 25.4 mm
(1.00")
25.4 mm
(1.00")
typ.
108.0 mm
(4.25")
typ.
133.3 mm
(5.25") typ.
10.2 mm
(0.40")
Wide typ.
9.7 mm
(0.38")
31.7 mm
(1.25")
44.5 mm
(1.75")
35.3 mm
(1.39")
85.9 mm
(3.38")
136.7 mm
(5.38") 187.5 mm
(7.38")
L1
L2
L3
L4
L5
ø 4.80 mm
(0.189")
2x 25.4 mm
(1.00")
30" 42" 54"
L1
388 mm
(15.3")
N/A N/A
L2
490 mm
(19.3")
795 mm
(31.3")
1097 mm
(43.2")
L3
592 mm
(23.3 " )
897 mm
(35.3 " )
1199 mm
(47.2 " )
L4
693 mm
(27.3 " )
998 mm
(39.3 " )
1300 mm
(51.2 " )
L5
760 mm
(30.0 " )
1067 mm
(42.0 " )
1372 mm
(54.0 " )
Note: Due to the variety of mounting
situations, mounting hardware is
not included with these stands.