DJI Ronin User Manual

Page 28

Ronin

User Manual

Upgrade

You can view the latest firmware version information on this page. Upgrade the firmware by following

the steps below:

1. Connect the Ronin to your computer via the Micro-USB cable and wait until the blue indicator LED

in the PC Assistant blinks.

2. Click “Upgrade”.

3. Wait for the download to finish.

4. Click “Upgrade” again and then click “Confirm”.

5. Power the Ronin off and on after the upgrade is complete.

Ensure your computer is connected to the internet.
Close any antivirus programs and network firewalls during the upgrade.
Ensure the Ronin is powered on during the upgrade.
Do not disconnect the USB cable during the upgrade.
Do not power off the Ronin until the upgrade is completed.

You can check the Assistant version via Info.

S/N is a 32 digit authorization code for future function activations. The authorization code for your unit

is filled in after its been manufactured. In the future, you may be asked to fill in a new S/N if you require

function upgrades. Fill in the S/N and then click the Write button. If you fill in an invalid S/N more than

30 times, your GCU will be locked and you will have to contact our customer support.

Info