DJI Ronin - Manual (Page 22)

22 © 2014 DJI. All Rights Reserved.
Ronin User Manual
More Menu
Briefcase Mode
When Briefcase Mode is switched on, the Ronin will be able to seamlessly transform into this operational
mode. With Briefcase Mode turned off, the Ronin will continue to allow the Roll axis to follow.
Motor Kill Switch
When activated, the Ronin is still powered on, but the motors will be powered off. This will allow an
adjustment to the gimbal or camera without having to turn off the gimbal. Prior to turning off the kill
switch, make sure the gimbal is positioned in the standard operating position. The motor kill switch can
also be used in case the gimbal operator runs into an issue, or you need to make a quick mechanical
adjustment to the gimbal or camera setup.
Calibrate Center
If the Ronin’s Pan axis is off center, you can recalibrate the true center of the Ronin using this switch.
Using a remote control, position the pan axis at dead center, then tap the Calibrate Center. Tap “Center”
again in the pop-up to confirm. Power cycle after calibrating center.
Calibrate System
Calibrate System is only used if you notice any kind of drift in any of the axes. To calibrate the system, place
the Ronin on the tuning stand and make sure it is completely steady. Then tap the Calibrate System button
and let the process finish before picking up the Ronin.
Restore Default Settings
This will restore all the factory settings that are configurable through the app.
Device List
To force the App to find the Ronin, select "Device List" to force the App to search for Bluetooth devices
it recognizes.
？
Viewer
Control Viewer More
14.50V
0:01:59
35.40 。
Power
Power
Angle
Angle
Pan Axis
Tilt Axis
Roll Axis
Voltage
Temperature
Time
2
-2
0 -0.01 。
-0.45 。
1.89 。
Gimbal Gimbal Control Viewer More
？
＊＊＊@＊＊＊.com
N/A Mode：
More
Briefcase Mode
Motor Kill
Calibrate Center
Calibrate System
Restore default settings
Accounts
Device List
Information
Viewer Menu
The viewer provides all the essential live data for monitoring the gimbals electronics as well as
feedback from the motors. Power is indicated for each axis. The current angle of each axis is also
indicated. The voltage of the battery, temperature of the main electronics, and also current uptime can
also be monitored via this menu.