DJI Z15-GH3 - Manual (Page 7)

©2013 DJI Innovations. All Rights Reserved.
7
Gimbal Description
Notes:
 Ensure nothing blocks the servo driver module rotation, to avoid motor damage.
 Clear obstacle at once if the rotating gimbal is blocked.
Tips:
 Servo driver module is with two motor command input ports and one encoder private port.
 HDMI-AV module converts HDMI video signal to AV video signal with a cable connecting to camera
HDMI port; also transforms TX signal into shutter control signal with a shutter control module.
 The camera shutter control cable is pluggable, user can unplug it if nonuse the shutter control function.
Servo Driver
Module 1
Servo Driver
Module 1
Pan
±±±360°
Pan
±±±360°
Roll
±±40°
Roll
±±40°
Tilt
±±360°
Tilt
±±360°
Servo Driver
Module 2
Servo Driver
Module 2
Servo Driver
Module 3
Servo Driver
Module 3
Motor Input Port
To G6 port of GCU
Motor Input Port
To G6 port of GCU
8-Pin Port
To G8 port of GCU
8-Pin Port
To G8 port of GCU
Camera Mount
Holes
Camera Mount
Holes
Camera LED
Indicator
Camera LED
Indicator
Camera Shutter
Control Cable
Camera Shutter
Control Cable
HDMI-AV Module HDMI-AV Module
Camera Mount
Position
Camera Mount
Position
Receiver Mount Board Receiver Mount Board
IMU Module IMU Module
Damping Unit Damping Unit