DJI Z15-GH3 - Manual (Page 12)

©2013 DJI Innovations. All Rights Reserved.
12
Camera Wiring/Shutter Control
Camera Wiring
Connect the camera correctly, since the gimbal works with a HDMI-AV module for converting video signal format
and transforming TX signal into shutter control signal. Ensure the camera is setup first, and then carry out the
following procedures to connect the camera and gimbal.
HDMI －AV
Interface
Camera HDMI Port
Camera
Shutter
Camera Lens
Camera Shutter
Control Cable
Gimbal LED Indicator
HDMI-AV
Module
IMU
step1: Connect the gimbal HDMI-AV module to camera HDMI port with a HDMI-AV connection cable.
step2: Connect the camera shutter control cable to the camera.
Notes:
 When disconnect the cable between HDMI-AV module and camera, dismount the camera, and unplug the
HDMI-AV interface.