Shutter control, Tips – DJI Z15-GH3 User Manual
Page 13
©2013
DJI Innovations. All Rights Reserved.
13
Shutter Control
The Z15 enables transforming TX command into shutter control signal, please set one
2-position
switch/channel for
remote shutter control.
Make sure the shutter control module is correctly mounted and wired.
Whichever 2-position switch on your transmitter selected, wire the right channel of receiver to SHUT port.
For example:
Position -1 Position -2
:
First shooting
Position -2Position -1
: No shooting
Position -1 Position -2
:
Second shooting
Notes:
Set the camera of Z15-GH3 to
“Creative video”, the shutt
er can be used to record video. One toggle is
for start/stop recording.
Tips:
The following diagram shows how the shutter control works.
If the shutter control works abnormally, please check each step.
TX
2-Position Switch
RC Receiver
2-Position Switch
Channel
TX Command
GCU
SHUT
Gimbal
HDMI-AV Module
Wireless
Internal Cable
Camera
Shutter
TX Command
TX Command
3-Pins Cable
Camera Shutter Control Cable
Tx
1
2-Positon
Switch
2