Escription, Imbal, Ndicator – DJI Z15-GH3 User Manual
Page 24: Port description, Gimbal led indicator, Gimbal, Description led indicator
©2013
DJI Innovations. All Rights Reserved.
24
Port Description
GCU
ROLL
For roll axis control
TITL
For tilt axis control
PAN
For pan axis control
MODE
For Working Mode switch
SHUT
For camera shutter control
AUX1
For HDMI switch
AUX2
For Gimbal orientation (down or forward) switch in FPV Mode
S-Bus Receiver
AUX3
PPM Receiver
To wireless video transmission unit, transmitting AV signal
XT60
To battery (To GIMBAL if
DJI Innovations
S800 used)
G6
To Gimbal, transmitting motor command
G8
To Gimbal, transmitting video signal
Micro-USB port: PC connection for configuration and firmware upgrades
CAN-Bus port: Use CAN-Bus to connect GCU to the flight control system
Gimbal
HDMI-AV Port
To Camera HDMI port
Motor Command
Input Port
To GCU G6
8-Pin Cable Port
To GCU G8
Gimbal LED Indicator
Description
LED Indicator
Camera and gimbal connected
Camera and gimbal disconnected