Gimbal × 1, Gimbal controller unit (gcu) × 1, Lens retaining ring × 1 – DJI Z15-GH3 User Manual

Page 4: Mounting bracket × 4, Mounting board for receiver ×1, Cable clamp ×1, Camera mount screw ч 1

In the Box

Gimbal

In the mechanical structure, the gimbal has built-in slip rings,

preventing wire rod from winding up, which also enables free

rotations for the 3

axes

rotating rods.

The gimbal has built-in Z15

gimbal special servos drive module

independent IMU module

and HDMI

－AV

module.

Gimbal Controller Unit (GCU)

Connect the gimbal controller to the flight control system by

CAN- Bus. The GCU will control the gimbal’s pan, roll and tilt

rotation.

Lens Retaining Ring

For fixing the camera lens

Mounting Bracket

For gimbal and landing gear connection.

Mounting Board for Receiver

×1

For fixing the GCU, and providing the mounting position for the
receiver or other device.

Cable Clamp

×1

For tidying the cables on gimbal.

Camera Mount Screw