Brandmotion FDMC-1261 - Manual (Page 3)

INSTALLATION
INSTRUCTIONS
1261 Instructions 9-12-14.doc Page 3 of 5
Step 6: Using Trim Removal Tool remove
hinge cover.
Step 7: Using Phillips Screw Driver remove
(2) screws attached to side covers.
Step 8: Using Trim Removal Tool remove rear
console end cap.
Step 9: Using Trim Removal Tool loosen
console trim panel to access Phillips screws.
Step 10: Using Phillips Screw Driver remove
(2) screws attached to side covers.
Step 11: Using Trim Removal Tool loosen
side console trim.