Bird Technologies SA-4000 - Manual (Page 96)

Bird Site Analyzer
86
Choosing the Displayed Measurement
The primary display shows one value on the large
numerical display and the dial. Other measurements
are displayed numerically below the dial.
☞
NOTE: When using a terminating power sensor,
only forward power can be measured. Reflected
power and match will not be displayed.
Toggle
between
Fwd, Refl,
and Match
Match 0.00 Loss (dB)
Fwd
0.00
Refl
0.0 Watts
0.00 Watts
Measure Power Mode
PwrUnit
Watts
Sensor Connected
MatchUnit
Rtn Loss
Display
Match