Bird Technologies SA-4000 - Manual (Page 19)

Introduction
9
1. Trace Graphic display of the measurement.
2. Calibration Indicator Indicates the calibration status.
3. Limit Line Value Indicates the limit value.
4. Limit Test Indicator Displays FAIL if any part of the trace
exceeds the limit value.
5. Limit Line A horizontal line that graphically
displays the limit value.
6. Marker Value Indicates the position and value of a
trace point.
7. Marker Cursor Identifies the trace point displayed in
the marker value.
8. Recalled Name Indicates the name of a recalled trace.
9. Soft Key Description Describes the function of the soft key to
the left of the description.
10. Indicator Ball Indicates if the trace is sweeping.
11. Scale Indicates the minimum and maximum
values displayed on that axis.
12. Units Indicates the measurement units for
that axis.
13. Battery Gauge Indicates whether the Site Analyzer is
using the internal battery or an external
power supply, and indicates the amount
of battery life remaining.
14. Mode Indicator Name of the current mode.