Bird Technologies SA-4000 - Manual (Page 27)

17
Chapter 4 Measure Match Mode
This measurement verifies and monitors the match
conditions in the antenna system at various
frequencies. The results are shown on an x-y graph.
Frequency is shown on the x-axis while return loss,
cable loss, or VSWR is shown on the y-axis.
Set the frequency and calibrate the Site Analyzer
before taking any readings.
Press the
Mode key
Press from
Select Mode 780.00 MHz 2500.00
Measure Match Mode
Calibration: OFF
99.99
1.00
V
S
W
R
Save/
Recall
Auto
Scale
Limit
Test OFF
HOLD
Print
Measure
Match
Fault
Location