Autocue QPro User Guide - Manual (Page 38)

QPro User Guide HM.docx 2011-07-14
38 © 2003-2011 Autocue Group Ltd.
Select a scroll value.
In the field next to the Update button, enter a new scroll rate. Click the Update button.
The new scroll rate is displayed for the scroll value. To save the scroll rates as a profile
Click the Save As Profile button.
Enter a profile name in the Profile Name field. Click OK.
Once the profile is saved, you can then load it again the next time you
wish to use the settings in the profile. You can do this by clicking the Load
button and selecting the profile from the dialogue box.
Note: It is also possible to use a profile created for an Autocue
Serial Multibutton scroll controller.
Autocue Serial Multibutton Controller
The Serial Multibutton Controller has one 9-way D connector which is plugged in to a serial
port on your computer.
Configure a Serial Multi-button Controller
Select your controller from the list and click Setup.