Autocue QPro User Guide - Manual (Page 14)

QPro User Guide HM.docx 2011-07-14
14 © 2003-2011 Autocue Group Ltd.
Clear time The time from the beginning of the rundown to the position of the cursor
Remain Read time remaining to the end of the rundown
Total Estimated read time of the whole rundown
Create a new script
Follow the steps outlined below to create a new QPro script.
To open a new file you can use any of the following commands
select File >> New…from the menu bar
click the New File button on the toolbar
press the key sequence: [Alt] >> [F] >> [N] An untitled runorder will appear.
Note: For detailed information about working with multiple scripts
refer to the managing rundowns section in this manual
To insert a new, blank script file into a runorder you can use any of the
following commands
select Script >> New…from the menu bar
press the [Insert] button on your computer keyboard
press the key sequence: [Alt] >> [S] >> [N]
In the New Script dialog enter the title of your script.
Click OK and the script title appears in the runorder.