Autocue QPro User Guide - Manual (Page 11)

QPro User Guide HM.docx 2011-07-14
11 © 2003-2011 Autocue Group Ltd.
Save your script
Click the Save button or select File >> Save from the Script Editor menu bar
Note: QPro has an “auto-save” function which will ask you to save
your work if you have not already done so.
Prompt your script
When you have prepared and saved your script, you can display it on a monitor for a
speaker or presenter to read.
Start prompting
You can begin prompting by selecting Prompt >> Begin Prompting from the Script Editor
menu bar or click the Begin Prompting button on the button bar.
When you enter prompt mode for the first time your computer screen will
need to be calibrated.
The prompt output will shake slightly for approximately 15 seconds.
After calibration has ended the Script Editor window will be displayed again. You will need to
select Prompt >> Begin Prompting again, your script will be displayed on your computer monitor.
Note: If you have an additional monitor attached to your computer or
you are using an on-camera unit to display your script refer to
the section “Using a second monitor” for information about
configuring them to work with QPro.
Use your connected scroll controller to scroll your script.
Stop prompting
Press the ESC key on the computer keyboard to stop prompting and return to the script editor
window.