Rockwell Automation 20D PowerFlex 700H/S Frame 12 Replacement Power Structure - Manual

Installation Instructions
PowerFlex
®
700S and 700H Frame 12
Replacement Power Structures
Introduction Important: The Power Modules on PowerFlex 700S and 700H frame 12
drives are matched at the factory and cannot be paired with any
other Power Modules. Therefore, when a Power Module fails,
you must replace both power structures on a frame 12 drive.
Use this document to install the replacement power structures on a frame 12
drive. This document covers the following replacement power structures:
Note: The frame 12 power structure kit does not contain the drive-rated
ASIC boards. You must either use the existing ASIC boards or order
replacement ASIC boards in order to complete this installation. Please refer
to the Spare Parts and Options List for PowerFlex Architecture (7) Class
Low Voltage AC Drives for part catalog numbers. This list is located at:
www.ab.com/support/abdrives/powerflex700s/phase2/index.html
From this page, click on the “Parts List” link to view a PDF of the parts list
for both 700S and 700H drives.
Spare Module Catalog String PowerFlex 700H AC Input PowerFlex 700H DC Input PowerFlex 700S AC Input PowerFlex 700S DC Input
SK-H1-PWRMOD-F12D 20CC820 20CH820 20DC820 20DH820
20CD820 20CJ820 20DD820 20DJ820
20CC920 20CH920 20DC920 20DH920
20CD920 20CJ920 20DD920 20DJ920
20CC1K0 20CH1K0 20DC1K0 20DH1K0
20CD1K0 20CJ1K0 20DD1K0 20DJ1K0
SK-H1-PWRMOD-F12E 20CE650 20CK650 20DE650 20DK650
20CF650 20CM650 20DF650 20DM650
20CE750 20CK750 20DE750 20DK750
20CF750 20CM750 20DF750 20DM750
20CE820 20CK820 20DE820 20DK820
20CF820 20CM820 20DF820 20DM820