Rockwell Automation GV3000 AC Pwr Module Ver. 5.0 Hardware Ref, Installation, and Troubleshooting - Manual (Page 68)

7Ć12
Table 7.1 Ć Wiring Signal and Control I/O to the Terminal Strip (Continued)
БББББ
Б БББ Б
БББББ
Terminal
Number
ББББББББББ
Б ББББББББ Б
ББББББББББ
Description
ББББББББББББББББББ
Б БББББББББББББББББ
ББББББББББББББББББ
Parameters/Wiring Connections
БББББББББББББББББББББББББББББББ
БББББББББББББББББББББББББББББББ
Wiring a Forward/Reverse Input
19 Digital Input 6
(Default Ć Forward/Reverse)
Digital input 6 is control function programmable through
parameter P.007. The following parameters must be set:
P.000: Control Source
P.006: Second Menu Password
P.007: Terminal Strip Digital Inputs Configure (Selects
and assigns a control function to digital inputs 6
to 8).
P.008: Terminal Strip Speed Reference Source (Analog,
Motor Operated Potentiometer (MOP), or
Preset Speeds)
P.027: Reverse Disable
Note that based on the settings of parameters P.000, P.007,
P.008, and r.030 if an RMI board is used, the following
parameters can affect digital input 6.
P.023: MOP Accel/Decel Time
P.024: MOP Reset Configuration
P.031 to P.038: Preset Speeds 1Ć8
Refer to the GV3000 Programming instruction manual
(D2Ć3339) for additional information.
Terminal 19 On = Reverse Direction
Diagram shows factory setting. From the pulse tachometer
end of the motor, clockwise rotation indicates forward moĆ
tor movement.