Rockwell Automation LZ Series Linear Motors - Manual (Page 57)

57 Publication LZ-UM001A-EN-P - January 2008
Appendix
B
Mounting Bolts and Torque Values
Introduction This appendix provides typical torque values for standard and metric bolts.
Recommended Seating Torque for Metric Bolts
Bolt Size (metric)
(1) Pitch Plain Cadmium Plated Zinc
Nm (in-lb) Nm (in-lb) Nm (in-lb)
M1.6 (2)
0.35 0.29 (2.6) 0.22 (1.95) 0.41(3.64)
M2 (2)
0.40 0.60 (5.3) 0.45 (3.98) 0.84 (7.42)
M2.5 (2)
0.45 1.24 (11) 0.93 (8.25) 1.74 (15.4)
M3 0.5 2.15 (19) 1.61 (14.25) 3.00 (26.6)
M4 0.7 4.6 (41) 3.47 (30.75) 6.48 (57.4)
M5 0.8 9.6 (85) 7.20 (63.75) 13.4 (119)
M6 1.0 15.8 (140) 11.9 (105) 22.1 (196)
M8 1.25 39.5 (350) 29.7 (262.5) 55.4 (490)
M10 1.5 76.8 (680) 57.6 (510) 115.2 (1020)
(1) Mounting hardware is ISO 898/1 socket head cap bolt that meets or exceeds ANSI B113M, ISO 261, ISO 262 (coarse series only).
(2) Microsize bolt.