Rockwell Automation System Release 3.0 PlantPAx System Application Templates Quick Start - Manual (Page 17)

Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013 17
Configure the Controller Application Chapter 1
Add Modules to Local Chassis
In this section, you are adding all the necessary modules to your local chassis, including network adapters and I/O modules,
to the I/O tree of a Logix controller.
1. In the Controller Organizer, right-click the backplane and choose New Module.
2. In the Search field, type a catalog number of a module that you are adding.
The example shows a 1756-EN2T network adapter being selected.
3. Select a module and click Create.
TIP To make it easier to locate a particular module, use the filters to view only the module types you need.
The Module Discovery tab takes you through the I/O tree of the Logix controller to determine which modules you need to
configure or modify. The tab is active if the controller is online and the network path is valid.