Rockwell Automation 9220-TG QUICK START CONTROLNET MESSAGE - Manual (Page 4)

ControlNet Message/Traffic Generator Tool 4
Publication 9220-10.1 — July 1996
Installing the Tool
1. Insert the tool disk into your computer’s 3.5” disk drive.
2. Create a directory on your hard drive for the tool:
mkdir tg Enter
The tg directory is used in TG.BAT. If you create a different directory
for the tool, you need to edit the cnxpath in TG.BAT
(set CNXPATH=c:\new_directory). The path sets a DOS environment
variable to instruct the tool where to look for CNXOR.CFG.
This gives you flexibility in placing the file and lets you load multiple
files, in different directories.
3. Change to that directory:
cd tg Enter
4. Copy the contents of the tool disk to the directory you created:
copy A:*.* Enter
5. Start the tool:
tg Enter
You see: