Rockwell Automation 9220-TG QUICK START CONTROLNET MESSAGE - Manual (Page 25)

ControlNet Message/Traffic Generator Tool 25
Publication 9220-10.1 — July 1996
Example CNXOR.CFG File
##########################
## CN Setup Parameters ##
##########################
##################################
# Define the CN Parameter Setups
#
CN.name: default setup2ms
#
# Describe the CN Setups
#
CN.default.title: Default
CN.default.originatorPortNum: 0
CN.default.originatorMacId: 0
CN.default.targetMacId: 8
CN.default.pit_time: 200
CN.default.smax: 5
CN.default.umax: 6
CN.default.slot_time: 21
CN.default.blank_time: 6
CN.default.gb_start: 12
CN.default.gb_center: 9
CN.default.redundancy: 3
CN.default.sched_max_frame: 255
CN.default.int_cnt_mod: 255
CN.default.gb_prestart: 15
CN.default.mcycle_start: 0
CN.default.mcycle_length: 0
CN.default.mcycle_count: 1
CN.default.mcycle_multiplier: 0
CN.setup2ms.title: 2ms PIT
CN.setup2ms.originatorPortNum: 0
CN.setup2ms.originatorMacId: 1
CN.setup2ms.targetMacId: 8
CN.setup2ms.pit_time: 200
CN.setup2ms.smax: 15
CN.setup2ms.umax: 16
CN.setup2ms.slot_time: 21
CN.setup2ms.blank_time: 6
CN.setup2ms.gb_start: 12
CN.setup2ms.gb_center: 9
CN.setup2ms.redundancy: 3
CN.setup2ms.sched_max_frame: 255
CN.setup2ms.int_cnt_mod: 255
CN.setup2ms.gb_prestart: 15
CN.setup2ms.mcycle_start: 0
CN.setup2ms.mcycle_length: 0
CN.setup2ms.mcycle_count: 1
CN.setup2ms.mcycle_multiplier: 0