Rockwell Automation 9220-TG QUICK START CONTROLNET MESSAGE - Manual (Page 23)

ControlNet Message/Traffic Generator Tool 23
Publication 9220-10.1 — July 1996
Connection Setup (continued)
This resource Description
Message.___.list: Provides a list of message names for the
CONNECTED>SEND MESSAGE cascading menu.
These message names will be associated with the
Connection name specified. Once a Connection has
been opened, these messages could be sent across
that Connection. These names will be shown in the
menu unless a Message.___.title is provided for
each name.
Connection.name: rackio (see Connection Setup)
Message.rackio.list: rout1 rout2 rout3 rout4
The name unconnected is reserved for messages to be
sent unconnected.
Message.unconnected.list: Provides a list of message names for the
UNCONNECTED>SEND MESSAGE cascading menu.
These names will be shown in the menu unless a
Message.___.title is provided for each name.
Message.unconnected.list: reset gaa
Message.___.title: Provides a title to be displayed in the
UNCONNECTED>SEND MESSAGE or
CONNECTED>SEND MESSAGE cascading menus.
If this is not provided, the name will be displayed.
Message.rout1.title: Pattern AA55
Message.reset.title: Reset
Message.gaa.title: Get Attributes All
Message.___.data: The data associated with the message.
For Unconnected messages, the data begins with the
Unconnected Service Code and is sent byte for byte
as specified. For Connected messages, the data begins
with the byte immediately following the Transport
header. The data bytes are in hex.
Message.rout1.data: 01 00 00 00 AA 55 AA 55
Message.reset.data: 05 02 20 01 24 01
Message.gaa.data: 01 02 20 01 24 01
Module.name: Provides a list of module names to be included in the
MODULES drop-down menu. This menu lists
executable tests that can be launched. These names
will be shown in the menu unless a Module.___.title is
provided for each name.
Module.name: 1771acn 1785l40c