Rockwell Automation 6181F_P Series E Integrated Display Computers User Manual - Manual (Page 63)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 63
Appendix
A
Specifications
The following tables contain specifications for the 1200P, 1500P, and 1700P
integrated display industrial computers. For additional specifications, go to
http://ab.rockwellautomation.com/Computers .
Table 2 - Hardware and Software Specifications
Specification Attribute 6181F, 6181P
Hardware Processor
Performance
Standard Intel Core Duo U2500, 1.2 GHz/2M L2 cache/533 MHz 9 W
Intel Celeron M423, 1.06 GHz/1M L2 cache/533 MHz 5.5 W
System chipset Intel 945GME, ICH7-M
System memory slots Dual channel DDR2, 2 DIMM slots, 4 GB max
System memory, installed
Performance
Standard 4 GB
2 GB
Expansion slots (1)
1200P and non-display
1500P
1700P
(1) Performance models only.
2 PCI (upgradable to 1 PCI + 1 PCI Express)
1 PCI (upgradable to 2 PCI slots or 1 PCI + 1 PCI Express)
1 PCI (upgradable to 2 PCI slots or 1 PCI + 1 PCI Express)
CompactFlash Type II slot
Performance
Standard 2 slots (one bootable
(2)
, one hot-swappable)
1 slot, bootable
(2)
(2) The CompactFlash card must be inserted in the bootable slot before power is applied.
Storage drive
6181P Performance/Standard
6181F Performance
6181F Standard 2.5-in. SATA rotating hard disk drive, 100 GB min
2.5-in. SATA SLC solid-state drive, 32 GB min
CompactFlash solid-state drive, 16 GB min
Optical disc drive
Performance
Standard Slim DVD-RW/CD-RW
None
I/O ports
Performance
Standard
• PS/2 mouse port
• PS/2 keyboard port
• Parallel port
• DVI-I port
• 2 serial COM ports
• 4 rear USB ports
• 1 front USB port
(3)
• Audio line in/line out
• Microphone
• 1 serial COM port
• 4 USB ports
• Audio line in/line out
• Microphone
(3) Not available on 1500P and 1700P display computers with stainless steel bezel.
Ethernet LAN 2 gigabit LAN ports (RJ45)
Software Operating systems Windows 7 Professional (32 bit)
Windows XP Professional, Service Pack 3
Windows Embedded Standard 2009