Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 16)

Chapter
2
Publication 2711E-UM003B–EN–P
Working with the PanelView e
Transfer Utility 32
This chapter provides instructions for setting up and using the
PanelView e Transfer Utility 32, including:
•
minimum hardware and software requirements
•
installing and starting the PanelView e Transfer Utility 32
•
exiting from the PanelView e Transfer Utility 32
The PanelView e Transfer Utility 32 has context-sensitive online
help that you can access at any time, by pressing the Help button,
F1
on your keyboard, or by clicking the Help menu item. You can also
click the icon
in the utility’s toolbar. Auto-Help automatically
displays help information as you work with the utility from one
application window to another.
For version information and information about obtaining technical
support, click the icon
in the utility’s toolbar.
You need the following hardware and software to install the
PanelView e Transfer Utility 32.
Table 2.A Hardware and Software Requirements
System Requirements
Hardware A personal computer with a 66-MHz, 486-DX or higher
microprocessor, with a recommended minimum of 16-MB RAM (for
Windows 95 operating system) or 32-MB RAM
(for Windows 2000(SP2)/NT operating system)
CD-ROM drive (recommended)
A hard disk with 10 MB of free space and 15 MB for RSLinx Lite
An 8-MB swap file
A 3.5-inch high-density (1.44-MB) disk drive
An RS-232 serial port for uploading or downloading applications, or
other communication cards listed later in this chapter
A standard VGA (640 by 480) display adapter configured for at least
16 colors
A mouse or pointing device supported by Windows
Software Microsoft Windows 2000(SP2), Windows NT Version 4.0, or Software Microsoft Windows 2000(SP2), Windows NT Version 4.0, or
Windows 95
System Requirements