Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 104)

Constructing the Transfer Path A–4
The format of the transfer path on a remote DH+ network is:
Transfer Path Format Valid Entries
ll:rrrrr.ss
ll local PI address
rrrrr PI Link number
ss PanelView address on remote DH+
0 – 77 (octal)
0 – 65535 (decimal)
0 – 77 (octal)
The Pyramid Integrator (PI) Link number for each DH+ network
must be unique. Use your PI Programming Software to configure
link numbers.
A PI chassis contains one RM module with two network channels. It
can also contain up to four KA modules, each with two network
channels. Using the RM and four KA modules, the PanelView e
Transfer Utility 32 can transfer files on any or all of 10 DH+
networks.
The figure on the following page shows a development computer
connected to a DH+ network. The PI routes file transfers among four
DH+ networks.
The valid transfer paths for the various PanelView terminals in the
figure are:
PanelView Address Valid Transfer Path
12 12
3 6:2.3
23 6:3.23
10 6:4.10
Multiple DH+ Networks
Connected by a Pyramid
Integrator (PI)