Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter User Manual
Page 70
70
Rockwell Automation Publication 2100-UM006A-EN-P - July 2013
Index
ControlLogix controller
configuring the adapter for
definition
limitations when using
PLC-5, SLC 500 or MicroLogix 1100 con-
troller
understanding the I/O image
using with
ControlLogix controller
installation
applying power to the adapter
commissioning the adapter
connecting to the network
preparing for
IP address
definition/classes
setting with BOOTP
L
LEDs, see status indicators
Logic Command/Status
in I/O image for
ControlLogix controller
Logix Designer application
M
MAC address, see hardware address
manual
conventions
Master-Slave hierarchy
definition
mechanical dimensions
messages, see explicit messaging or I/O
MicroLogix 1100 controller
limitations when using the I/O
MOD status indicator
troubleshooting with
N
NET A status indicator
troubleshooting with
NET B status indicator
troubleshooting with
network cable
network IDs
Nonvolatile Storage (NVS)
definition
in adapter
O
ODVA EtherNet/IP specification
P
parameters
accessing
convention
restoring to factory-default settings
ping
PLC-5 controller
limitations when using the I/O
PORT status indicator
troubleshooting with
power consumption
PowerFlex drives
compatible with adapter
preparing for an installation
processor, see controller
programmable logic controller, see controller
Q
quick start
R
reference/feedback
in I/O image for
ControlLogix controller
regulatory compliance
requested packet interval
RSLinx Classic
using
RSLogix 5, RSLogix 500, and RSLogix 5000
software
S
safety precautions
scanner
SLC 500 controller
limitations when using the I/O
specifications
adapter
EtherNet/IP address
EtherNet/IP subnet mask
status indicators
definition
MOD
NET A
NET B
normal operation
PORT
troubleshooting with
understanding
Studio 5000 software
subnet mask
definition
setting with BOOTP
switches