Rockwell Automation 2100-ENET CENTERLINE 2100 Motor Control Centers EtherNet/IP Network Adapter - Manual (Page 45)

Rockwell Automation Publication 2100-UM006A-EN-P - July 2013 45
Using the I/O Chapter 5
The example ladder logic below can be used to toggle the E3 Plus Output A on
and off with the descriptive tags created by the E3 Plus Add-on Profile. The
prefix for the E3 Plus Controller tags is determined by the name assigned when
configuring the
I/O.
Figure 5: ControlLogix Example Ladder Logic Program Using an E3 Plus Add-on Profile for Inputs
Figure 6: ControlLogix Example Ladder Logic Program Using an E3 Plus Add-on Profile for Outputs
Create Ladder Logic by Using the RSLogix 5000 Classic Profile
(versions 13…15)
Because the RSLogix 5000 Classic Profile has been significantly improved upon
by RSLogix 5000 drive Add-on Profiles, version 16 or later, it is highly
recommended to use RSLogix 5000 E3 Plus module Add-on Profiles to take
advantage of its benefits (more intuitive, time saving, and less likely to make
ladder logic program errors).