Rockwell Automation 61C544A RTD Module - Manual (Page 2)

E Copyright Reliance Electric Industrial Company 1993.
Beldent is a trademark of Cooper Industries.
ReSourcet is a trademark of Reliance Electric Company or its subsidiaries.
Reliancer, AutoMaxr and AutoMater are registered trademarks of Reliance Electric
ąąCompany or its subsidiaries.
The information in this user's manual is subject to change without notice.
DANGER
THIS UNIT AND ITS ASSOCIATED EQUIPMENT MUST BE INSTALLED,
ADJUSTED, AND MAINTAINED BY QUALIFIED PERSONNEL WHO ARE
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF ALL EQUIPMENT
IN THE SYSTEM AND THE POTENTIAL HAZARDS INVOLVED. READ AND
UNDERSTAND THIS MANUAL AND OTHER MANUALS APPLICABLE TO THE
EQUIPMENT IN YOUR INSTALLATION. FAILURE TO OBSERVE THESE
PRECAUTIONS COULD RESULT IN SEVERE BODILY INJURY OR LOSS OF LIFE.
WARNING
INSERTING OR REMOVING THIS MODULE OR ITS CONNECTING CABLES MAY
RESULT IN UNEXPECTED MACHINE MOTION. POWER TO THE MACHINE
SHOULD BE TURNED OFF BEFORE INSERTING OR REMOVING THE MODULE
OR ITS CONNECTING CABLES. FAILURE TO OBSERVE THESE PRECAUTIONS
COULD RESULT IN BODILY INJURY.
CAUTION
THIS MODULE CONTAINS STATICĆSENSITIVE COMPONENTS. CARELESS
HANDLING CAN CAUSE SEVERE DAMAGE. DO NOT TOUCH THE CONNECTORS
ON THE BACK OF THE MODULE. WHEN NOT IN USE, THE MODULE SHOULD BE
STORED IN AN ANTIĆSTATIC BAG. THE PLASTIC COVER SHOULD NOT BE
REMOVED. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN
DAMAGE TO OR DESTRUCTION OF THE EQUIPMENT.