Rockwell Automation 57C600 AutoMax Programming Exec V3.8 (+ Regulators) Install - Manual (Page 5)

1Ć1
1.0 INTRODUCTION
The products described in this manual are manufactured or
distributed by Reliance Electric Industrial Company.
This manual provides installation instructions for the following
AutoMax Programming Executive V3.x and optional Distributed
Power System (DPS) drive software model numbers:
AutoMax Programming Executive Software
D 57C600 SingleĆUser Executive
D 57C601 SingleĆUser Executive Upgrade
D 57C602 SingleĆUser Multicopy Executive
D 57C620 SharedĆUser Executive (5 Users)
D 57C621 SharedĆUser Executive Upgrade
D 57C622 Additional 5ĆUser License for SharedĆUser Executive
DPS Drive Software
D 57C651 SD3000 DPS Software
D 57C652 SF3000 DPS Software
D 57C653 SA3000 DPS Software
D 57C654 SA500 DPS Software
D 57C655 SB3000 DPS Software
D 57C657 SA3100 DPS Software
D 57C650 SharedĆUser License for DPS Software (5 users)
The AutoMax Programming Executive software (Executive
software") is a Microsoft WindowstĆbased application used to
configure, program, and monitor AutoMax Distributed Control
Systems. It includes the editors and compiler necessary to create
application tasks in BASIC, Control Block, and PC/Ladder Logic
languages. It also contains the operating system for AutoMax
Processors.
The DPS drive software (DPS software") products are options
required for configuring, programming, and monitoring DPS drives.
These options also contain the operating systems for the Universal
Drive Controller modules and Power Module Interface hardware used
to control DPS drives. Each drive type is a separate option.
Both the Executive software and the optional DPS software installed
must be either singleĆuser or sharedĆuser versions. The DPS software
options can be used only with V3.5 and later of the Executive
software. DPS software options cannot be used as standĆalone
applications. Executive software must always be installed before any
DPS software options.
The Executive software is described in J2Ć3106. The DPS software
options are described in various instruction manuals that ship with
the software.