Rockwell Automation 2755 Hand-Held Cordless Bar Code Scanners - Manual (Page 171)

Index I–8
Publication 2755-6.6
D
D 2 of 5 - 1 Discrete Length ,
1-12
D 2 of 5 - 2 Discrete Lengths,
1-12
D 2 of 5 - Any Length , 1-12
D 2 of 5 - Length Within Range,
1-12
Data Transmission Formats, 1-25
DEC VT 2xx/3xx/4xx, 1-7
Decode Options, 1-15
Deocde Redundancy 1, 1-19
Deocde Redundancy 2, 1-19
Deocde Redundancy 3, 1-19
Decode UPC/EAN Supplementals,
1-16
default settings, 1-4
Delete Codabar, 1-10
Delete Code 128, 1-8
Delete Code 39, 1-8
Delete Code 39 Full ASCII, 1-8
Delete D 2 of 5, 1-9
Delete EAN 128, 1-9
Delete I 2 of 5, 1-9
Delete MSI Plessey, 1-10
Delete UPC/EAN, 1-8
Disable All Code types, 1-7
Disable EAN Zero Extend, 1-16
Do Not Beep After Good Decode,
1-18
Do Not Buffer Code 39, 1-17
Do Not Check Parity, 1-31
Do Not Convert UPC-E to
UPC-A, 1-16
Do Not Transmit AIM Code ID,
1-38
Do Not Transmit Code ID
Character, 1-37
Do Not Transmit No Decode
Message, 1-17
Do Not Transmit UPC-A Check
Digit, 1-15
Do Not Transmit UPC-E Check
Digit, 1-15
Do Not Verify Code 39 Check
Digit, 1-18
E
Enable 1 MSI Plessey Check Digit,
1-15
Enable 2 MSI Plessey Check Digits,
1-15
Enable All Code types, 1-7
Enable EAN Zero Extend, 1-16
H
Hardware Handshaking
None, 1-31
RTS/CTS, 1-31
High Beeper Volume, 1-18
Host Interface Code, 1-7