Rockwell Automation 2755 Hand-Held Cordless Bar Code Scanners User Manual

Page 122

Application Examples

A–5

Publication 2755-6.6

4. Scan the Stop Bit Select bar code.

1 Stop Bit

5. Scan the ASCII Format bar code.

8-bit

Enhanced Decoder Setup for the AUX Port Pass-Through

You need to configure the enhanced decoder. Follow the steps below
or refer to the Enhanced Decoder User Manual
(Publication No. 2755-833).

1. Select Aux Terminal Data Entry (Screen 8) from the Main Menu.

2. Set Enable Keyboard Entry = Yes

3. Save and Exit the configuration.

4. Move internal selector (jumper) to the data entry position on the

system board (B-5, B-6).

5. Make sure the hand-held scanner baud rate = 9600,

parity = None, data bits = 8, and stop bits = 1.

6. See Chapter 13 of Enhanced Decoder User Manual

(Publication No. 2755-833) for additional information.