Hm_getbootreason – Rockwell Automation 2711P Software Development Kit User Manual User Manual

Page 67

Text mode
Original mode

Publication 2711P-UM005A-EN-P - March 2007

PanelView Plus CE-Specific Extensions to the WinCE API 67

Remarks:

This function performs a reboot of the board. The reboot reason code
is set, caches are flushed and a full reboot is performed, including
reset of hardware chips. Applications should use this function instead
of alternatives such as using KernelIoControl to reset the board.

Portability:

This function is specific to PanelView Plus CE and the RAC6182
hardware.

Requirements:

hm_GetBootReason

This function gets the reason for the last boot.

DWORD hm_GetBootReason (void);

Runs On

Version

Defined In

Link To

PanelView Plus CE

RAC6182

All

HardwareMonitorAPI.h

HardwareMonitor.lib