Rockwell Automation 2711P Software Development Kit User Manual - Manual (Page 41)

Publication 2711P-UM005A-EN-P - March 2007
PanelView Plus CE-Specific Extensions to the WinCE API 41
Watchdog_SW_Tag
This function tags the software watchdog timer.
DWORD Watchdog_SW_Tag (DWORD dwWDTagID, DWORD
dwTimeout)
Parameters:
dwWDTagID
The Watchdog Tag ID that was assigned by Watchdog_SW_TagEx.
dwTimeout
Timeout in milliseconds. Same as Table .
Return Values:
Same as Table .
Remarks:
Once the application is registered for watchdog monitoring, the
application typically calls Watchdog_SW_Tag () with dwTimeout set to
WATCHDOG_KICK unless the caller wants to change the timeout.
The resolution of the high priority thread that watches over the
software tags is 50 milliseconds.
Portability:
The RAC6182 does not have a Software Watchdog.
Requirements:
Runs On Version Defined In
PanelView Plus CE All wdapi.h