Rockwell Automation 2711P Software Development Kit User Manual - Manual (Page 66)

Publication 2711P-UM005A-EN-P - March 2007
66 PanelView Plus CE-Specific Extensions to the WinCE API
The monitor level specified in lfUpperWarningLevel and
lfLowerWarningLevele varies depending on the type of parameter
being monitored.
See Hardware Monitor Parameters for type/units.
The upper warning level for MONITOR_ID_BATTERY_VOLTAGE is
always MONITOR_WARNING_LEVEL_UNDEFINED.
The lower warning level for MONITOR_ID_CPU_TEMPERATURE is
always MONITOR_WARNING_LEVEL_UNDEFINED.
Portability:
The function prototype is the same as the RAC6182. However, the
MONITOR _ID parameters are different between the platforms.
Requirements:
Shutdown and Re-Boot Functions
These functions permit an application to boot the system and
determine how the system was last shutdown.
hm_RebootBoard
This function reboots the system.
BOOL hm_RebootBoard (void);
Return Values:
Returns FALSE on failure. Function will not return on success, because
the board will reset immediately.
Runs On Version Defined In Link To
PanelView Plus CE
RAC6182
All HardwareMonitorAPI.h HardwareMonitor.lib