Rockwell Automation 57C411 Resolver Input Module - Manual (Page 7)

1Ć1
1.0 INTRODUCTION
The Resolver Input Module is used to input the angular position of a
resolver rotor to the DCS 5000 system. The module provides 12Ćbit
resolution of one revolution and a 2Ćbit revolution counter. The
resolver position may be sampled from 500 microseconds to 32.767
seconds. An external strobe input is provided to permit
synchronization of the DCS 5000 system to an external event. The
module can be programmed to interrupt on every sample.
Typically, this module is used to input rotary shaft position for the
purpose of determining shaft position or velocity.
This manual describes the functions and specifications of the
module. It also includes a detailed overview of installation and
servicing procedures, as well as examples of programming methods.
Related publications that may be of interest:
D JĆ2611
DCS 5000 PRODUCT SUMMARY
D JĆ3600 DCS 5000 ENHANCED BASIC LANGUAGE
INSTRUCTION MANUAL
D JĆ3601 DCS 5000 CONTROL BLOCK LANGUAGE
INSTRUCTION MANUAL
D JĆ3602 DCS 5000 LADDERLOGIC LANGUAGE
INSTRUCTION MANUAL
D JĆ3629 DCS 5000 REMOTE I/O INSTRUCTION MANUAL
D JĆ3630 DCS 5000 PROGRAMMING TERMINAL
INSTRUCTION MANUAL
D JĆ3635 DCS 5000 PROCESSOR MODULE INSTRUCTION
MANUAL
D IEEE 518 GUIDE FORTHE INSTALLATION OF ELECTRICAL
EQUIPMENT TO MINIMIZE ELECTRICAL NOISE
INPUTS TO CONTROLLERS FROM EXTERNAL
SOURCES