Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 59)

Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 59
Appendix
A
Data Types
Supported Data Types The following data types are supported.
When you see the controller variables in PanelView Plus, it will be shown as
described in the table below.
Structured data types are NOT supported.
When Using Array
Variables A variable can be created as an array of data types and up to three dimensions are
supported. The following rules must be observed when using an array of data
types.
1. An array cannot be a Boolean data type.
2. An array cannot be an Array data type.
Data Type Hex Value Dec Value Description
BOOL 0xC1 193 Logical Boolean with values TRUE(1) and FALSE(0)
SINT 0xC2 194 Signed 8-bit integer value.
INT 0xC3 195 Signed 16-bit integer value.
DINT 0xC4 196 Signed 32-bit integer value.
LINT
(1)
(1) LINT data types are not fully supported in PanelView Plus. When using LINT tags, values that are less than 53
bits are not displayed correctly or may appear wireframed on the display client.
0xC5 197 Signed 64-bit integer value.
USINT 0xC6 198 Unsigned 8-bit integer value.
UINT 0xC7 199 Unsigned 16-bit integer value.
UDINT 0xC8 200 Unsigned 32-bit integer value.
ULINT 0xC9 201 Unsigned 64-bit integer value.
REAL 0xCA 202 32-bit floating point value.
LREAL 0xCB 203 64-bit floating point value.
STRING (2)
(2) The STRING data type does not support Unicode.
0xDA 218 Character string.
Data Type (Micro800) Appears as Data Type (PanelView Plus)
BYTE USINT
WORD UINT
DWORD UDINT
LWORD ULINT