Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 24)

24 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 2 Create a PanelView Plus Project
4. Select the Online folder to
display the list of available tags
that you can assign to the object.
The Tag Browser window will
communicate to the Micro800
controller and show all available
Micro800 global variables that
can be referenced in PanelView
Plus. Offline selection of
variables is not supported.
5. For examples of how to assign
the various tags to your display
object, see the following sections
below.
To display a counter variable
(CV), see
Assign a CV Tag to the
Display Object on page 25 .
To display a project variable
(PV), see
Assign a PV Tag to the
Display Object on page 26 .
To display an array variable, see
When Using Array Variables on
page 59
for instructions.