Rockwell Automation 2094-BMxx-M Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules Installation Instructions User Manual
Page 11
Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules 11
Rockwell Automation Publication 2094-IN011D-EN-P - August 2013
5. Gently push the module against the power rail connectors and into the final mounting
position.
6. Use 2.26 N•m (20 lb•in) torque to tighten the mounting screws.
7. Repeat
step 1
through
step 6
for each AM, IPIM, shunt, or slot-filler module in your
Bulletin 2094 drive system.
IMPORTANT
There are two mounting screws when mounting 2094-BC04-M03-M, and
2094-BC07-M05-M (double-wide) IAM modules, and 2094-BM03-M and
2094-BM05-M (double-wide) AM modules.
Power Rail
Bracket secured in slot.
IAM or AM Power Module, IPIM,
Shunt, or Slot-filler Module
(IAM power module is shown)
Mounting Screws
Bottom front view of
IAM module.
Bottom front view of
AM, shunt, or
slot-filler module
(AM module is shown).