Rockwell Automation 1769-OF4VI CompactLogix Module - Manual (Page 7)

Compact 1769-OF4VI Isolated Analog Output Module 7
Rockwell Automation Publication 1769-IN076B-EN-P - August 2010
The following procedure shows you how to assemble the Compact I/O system.
1. Disconnect power.
2. Check that the bus lever of the module to be installed is in the unlocked
(fully right) position.
3. Use the upper and lower tongue-and-groove slots (1) to secure the
modules together (or to a controller).
4. Move the module back along the tongue-and-groove slots until the bus
connectors (2) line up with each other.
5. Push the bus lever back slightly to clear the positioning tab (3). Use your
fingers or a small screwdriver.
Item Description Item Description
1 Tongue-and-groove slots 4 Bus lever
2 Bus connectors 5 End-cap terminator
3 Positioning tab 6 End-cap bus terminator
6
5
4
3
1
1
2