Rockwell Automation 1760-DNET Pico DeviceNet Communications Module User Manual - Manual (Page 62)

Publication 1760-UM003A-EN-P - September 2005
6-18 Application Examples for Pico
Year time switch: Y1 – Y8
The following commands are used to read the logic state of the
individual year time switches.
Example:
Data 1 = 1
hex
l HY2 is active
T10 0/1
... ...
T16 0/1
Table 6.32 Telegram Structure
Byte Meaning Value (hex), sent by
Master Slave Master Slave
Attribute ID: Read 88 –
0 Response:
Read successful – C2
Command rejected –
C0
(1)
(1) Possible causes page 6-34
0 1 Len 01 01
1 2 Type 91 91
2 3 Index 00 00
3 4 Data 1 (Low Byte) 00 Table 6.33
4 – 6 5 – 7 Data 2 – 4 00 00
Table 6.33 Byte 3 (master) or byte 4 (slave): Data 1
Data 1 Bit 7 6 5 4 3 2 1 0
HY1 0/1
HY2 0/1
HY3 0/1
HY4 0/1
HY5 0
HY6 0
HY7 0
HY8 0
Table 6.31 Byte 3 to 4 (master) or Byte 4 to 5 (slave): Data 1 to 2