beautypg.com

5 - addressing from data highway plus, Chapter objectives, Limitations on sending commands – Rockwell Automation 1779-KP5_KP5R ORD.1779-5.3 User Manual

Page 43: Addressing from data highway plus

background image

Chapter

5

5Ć1

Addressing from Data Highway Plus

In this chapter, we provide a description of how to address nodes on:

Data Highway II from nodes from Data Highway Plus.
Another Data Highway Plus connected to the same Data Highway II

network.

Another Data Highway Plus connected to a remote Data Highway II

network.

The 1779-KP5 replies to the following diagnostic commands from a Data
Highway Plus node:

Diagnostic Status
Diagnostic Read
Reset Diagnostic Counters
Diagnostic Loop

Refer to Chapter 6 for a list of 1779-KP5 diagnostic counters and
diagnostic status bytes.

This section describes how you address a local Data Highway II node. A
local Data Highway II node is a node on the Data Highway II link directly
connected to the Data Highway Plus link through a 1779-KP5. Figure 5.1
shows an example configuration.

Chapter Objectives

Limitations on Sending

Commands

Addressing a Local Data

Highway II Node Using Local

Addressing