Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions - Manual (Page 52)

7-2 Specifications
Publication 1784-IN003D-EN-P - January 2006
EFT/B immunity IEC 61000-4-4:
± 2 kV at 5 kHz on communications ports
Surge transient immunity IEC 61000-4-5:
± 2 kV line-earth (CM) on communications ports
Conducted RF immunity IEC 61000-4-6:
10Vrms with 1 kH sine-wave 80% AM from 150kHz...80MHz
Enclosure type rating None (open-style)
Power requirements In US, this equipment must be powered from UL Listed Information
Technology Equipment or UL Listed Industrial Control Equipment. In Canada,
this equipment must be powered by an SELV source, CSA Certified
Information Technology Equipment, or CSA Certified Process Control
Equipment.
5V dc, 700 mA max., Class 2
Power dissipation 3.5 W
Isolation voltage (continuous-voltage
withstand rating) 50V continuous
Tested to withstand 600V for 60 s
Wiring category (1) 2 - on communications ports
Certifications (when product is marked) (2) UR UL Recognized Component Industrial Control Equipment
CSA CSA Accepted Component for Process Control Equipment
CSA Accepted Component for Process Control Equipment in Class
I, Division 2 Group A,B,C,D Hazardous Locations
CE European Union 89/336/EEC EMC Directive, compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
C-tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
EEx (1784-PCIC only) European Union 94/9/EC ATEX Directive,
compliant with:
EN 50021; Potentially Explosive Atmospheres, Protection “n”
(Zone 2)
CI ControlNet International conformance tested to ControlNet
specifications
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication 1770-4.1.
(2) See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.