Update the existing driver in windows xp, Update the existing driver in windows xp -3 – Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions User Manual
Page 19
Install the Driver in Windows XP 2-3
Publication 1784-IN003D-EN-P - January 2006
9. Click Browse.
10. Navigate to the folder that contains the installation files.
The installation files can be found in the \Drivers\Win2K_WinXP folder on
the 1784-PCIC(S) Driver CD-ROM.
11. Click OK.
12. Click Next.
13. Click Finish.
The driver is now ready to use. Go on to Chapter 5.
Update the Existing Driver in Windows XP
Follow these steps to update the existing device driver on a personal computer
running Windows XP.
1. If you are browsing with RSLinx software, close RSWho.
2. Right-click My Computer.
IMPORTANT
If prompted to overwrite existing files, click Yes.
IMPORTANT
During the update procedure, communication through the card will be
disrupted.
This manual is related to the following products: