Update the existing driver in windows 2000, Update the existing driver in windows 2000 -4 – Rockwell Automation 1784-PCIC ControlNet PCI Communication Interface Card Installation Instructions User Manual
Page 26
3-4 Install the Driver in Windows 2000
Publication 1784-IN003D-EN-P - January 2006
Update the Existing Driver in Windows 2000
Follow these steps to update the existing device driver on a personal computer
running Windows 2000.
1. If you are browsing with RSLinx software, close RSWho.
2. Right-click My Computer.
3. Click Manage.
4. In the left window pane, click the + to the left of System Tools to open it.
5. Under System Tools, click Device Manager.
6. In the right window pane, click the + to the left of A-B Virtual Backplane to
expand it.
7. Right-click A-B 1784-PCIC(S).
8. Click Properties.
IMPORTANT
During the update procedure, communication through the card
will be disrupted.
TIP
If you see more than one A-B 1784-PCIC(S) entry, perform the
update on only one of the entries.