Rockwell Automation 1769-IT6 Compact I/O 1769-IT6 Thermocouple/mV Input Module - Manual (Page 140)

140 Rockwell Automation Publication 1769-UM004B-EN-P - March 2010
Appendix E Module Configuration by Using a MicroLogix 1500 System and RSLogix 500 Software
For example, to obtain the general status of channel 2 of the module located in
slot e, use address I:e.6/2.
Figure 56 - General Status of Channel 2
1769-IT6 Configuration File
The configuration file contains information you use to define the way a specific
channel functions. The configuration file is explained in more detail in
Configuring Channels on page 40 .
The configuration file is modified by using the programming software
configuration screen. For an example of module configuration by using RSLogix
500 software, see
Configuring the 1769-IT6 Module in a MicroLogix 1500
System on page 141 .
TIP The end cap does not use a slot address.
Table 16 - Software Configuration Ch annel De faults
(1)
(1) May be overridden by the software.
Parameter Default Setting
Disable/Enable Channel Disable
Filter Frequency 60 Hz
Input Type Thermocouple Type J
Data Format Raw/Proportional
Temperature Units °C
Open-circuit Response Upscale
Disable Cyclic Calibration Enable
I:e.6/2
Input File Type
Slot
Word
Bit
Bit Delimiter
Word Delimiter Element Delimiter
0 1 2 3
Ada
pter
Compact I/O Compact I/O Compact I/
O
En
d Cap
Slot Number